← 예시
기계 부품

608 베어링용 필로우 블록

CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.

프롬프트

Pillow block bearing housing for one 608 ball bearing (Ø22 outside, 7 mm wide, Ø8 bore), one solid. Frame: the shaft axis is X, at Y=0, Z=20; the base sits on Z=0. Base plate: Y=-30..30, X=-6..6, Z=0..6. Housing: a cylinder Ø34 along X, X=-6..6, centred on the shaft axis, joined to the base by a web Y=-17..17, X=-6..6, Z=0..20. Bearing seat: Ø22 bore 7 mm deep from the face X=-6 (press fit for the bearing outer ring), with a shoulder; the remaining 5 mm has a Ø14 through hole for shaft clearance. Two M5 mounting slots go through the base along Z, 5.5 mm wide, 10 mm long along Y, centred at Y=±24, X=0.

모델 정보

전체 크기
12 × 60 × 37 mm
바디 수
1
부피
11.5 cm³

다운로드

제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.

스튜디오에서 열기

만들고 싶은 부품이 있나요?

예제를 열어보거나 실제 필요한 부품을 설명해보세요.

무료 크레딧·프로모션 안내