← 示例
机械零件

8 mm 轴用开口轴环

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

Split clamping shaft collar for an 8 mm shaft, one solid. Frame: the shaft axis is Z. Ring: outer Ø22, bore Ø8, height Z=0..10, 0.5 x 45° chamfers on all four circular edges. A 1 mm wide slit cuts through one side of the ring along the plane X=0 for Y>0 (from the bore to the outside), full height. An M3 clamp screw crosses the slit tangentially along X at Y=7, Z=5: Ø3.4 clearance hole with a Ø6 x 3 mm counterbore on the X+ side, and a Ø2.5 tap-drill hole on the X- side for M3 threads.

模型信息

整体尺寸
22 × 22 × 10 mm
实体数
1
体积
3.0 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动