← 예시
기계 부품

8 mm 축용 분할 샤프트 칼라

CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.

프롬프트

Split clamping shaft collar for an 8 mm shaft, one solid. Frame: the shaft axis is Z. Ring: outer Ø22, bore Ø8, height Z=0..10, 0.5 x 45° chamfers on all four circular edges. A 1 mm wide slit cuts through one side of the ring along the plane X=0 for Y>0 (from the bore to the outside), full height. An M3 clamp screw crosses the slit tangentially along X at Y=7, Z=5: Ø3.4 clearance hole with a Ø6 x 3 mm counterbore on the X+ side, and a Ø2.5 tap-drill hole on the X- side for M3 threads.

모델 정보

전체 크기
22 × 22 × 10 mm
바디 수
1
부피
3.0 cm³

다운로드

제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.

스튜디오에서 열기

만들고 싶은 부품이 있나요?

예제를 열어보거나 실제 필요한 부품을 설명해보세요.

무료 크레딧·프로모션 안내