← Examples
Gears & power transmission

HTD 5M timing pulley, 20 teeth

CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.

The prompt

HTD 5M timing pulley, 20 teeth, for a 15 mm wide belt, one solid. Frame: the axis is Z. Toothed section Z=0..16 with the standard HTD 5M tooth profile for 20 teeth. Flanges Ø40 x 1.5 mm on both sides (Z=-1.5..0 and Z=16..17.5). Hub Ø22 at Z=-9.5..-1.5. Bore Ø8 through everything. One M4 set screw hole goes radially through the hub along +X at Z=-5.5, Ø3.3 for tapping.

Model facts

Overall size
40 × 40 × 27 mm
Bodies
1
Volume
15.4 cm³

Download

Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.

Open in studio

Have a part in mind?

Open an example or describe a part you actually need.

Free credits and current offers