← 예시
기어·동력 전달

HTD 5M 타이밍 풀리, 20T

CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고 단면을 확인할 수 있습니다.

프롬프트

HTD 5M timing pulley, 20 teeth, for a 15 mm wide belt, one solid. Frame: the axis is Z. Toothed section Z=0..16 with the standard HTD 5M tooth profile for 20 teeth. Flanges Ø40 x 1.5 mm on both sides (Z=-1.5..0 and Z=16..17.5). Hub Ø22 at Z=-9.5..-1.5. Bore Ø8 through everything. One M4 set screw hole goes radially through the hub along +X at Z=-5.5, Ø3.3 for tapping.

모델 정보

전체 크기
40 × 40 × 27 mm
바디 수
1
부피
15.4 cm³

다운로드

제작하거나 사용하기 전에 사용하는 CAD 도구나 슬라이서에서 형상과 치수를 확인하세요.

스튜디오에서 열기

만들고 싶은 부품이 있나요?

예제를 열어보거나 실제 필요한 부품을 설명해보세요.

무료 크레딧·프로모션 안내