← Examples
Mechanisms & assemblies

Parallel gripper finger pair

CADlingo generated this model from the prompt below. Open it in the studio to inspect it in 3D and view sections.

The prompt

Pair of parallel-gripper fingers as two separate solids, mirror images across the plane Y=0. Each finger: X=0..60, Z=-10..10 (20 mm wide), 12 mm thick along Y; in the modeled open position the gripping faces are at Y=10 and Y=-10, facing each other. At the tip end (X=36..60) each gripping face has a 120° V-notch running along Z, 5 mm deep, centred at X=48, so round parts from Ø10 to Ø30 seat in both notches as the fingers close. Each finger has two M4 counterbored mounting holes through its thickness along Y at X=8 and X=28, Z=0, counterbored from the outer face.

Model facts

Overall size
60 × 44 × 20 mm
Bodies
2
Volume
25.7 cm³

Download

Check the geometry and dimensions in your own CAD tool or slicer before you make or use this part.

Open in studio

Have a part in mind?

Open an example or describe a part you actually need.

Free credits and current offers