← 示例
机构与装配

平行夹爪手指一对

这是 CADlingo 根据下方提示词生成的模型。在工作台中打开,即可在 3D 中查看并检查剖面。

提示词

Pair of parallel-gripper fingers as two separate solids, mirror images across the plane Y=0. Each finger: X=0..60, Z=-10..10 (20 mm wide), 12 mm thick along Y; in the modeled open position the gripping faces are at Y=10 and Y=-10, facing each other. At the tip end (X=36..60) each gripping face has a 120° V-notch running along Z, 5 mm deep, centred at X=48, so round parts from Ø10 to Ø30 seat in both notches as the fingers close. Each finger has two M4 counterbored mounting holes through its thickness along Y at X=8 and X=28, Z=0, counterbored from the outer face.

模型信息

整体尺寸
60 × 44 × 20 mm
实体数
2
体积
25.7 cm³

下载

制作或使用前,请在您的 CAD 工具或切片软件中检查几何形状和尺寸。

在工作室中打开

有想做的零件吗?

打开一个示例,或者描述你真正需要的零件。

免费积分及当前活动