← 作例
機構・アセンブリ

平行グリッパーのフィンガー対

CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認や断面表示ができます。

プロンプト

Pair of parallel-gripper fingers as two separate solids, mirror images across the plane Y=0. Each finger: X=0..60, Z=-10..10 (20 mm wide), 12 mm thick along Y; in the modeled open position the gripping faces are at Y=10 and Y=-10, facing each other. At the tip end (X=36..60) each gripping face has a 120° V-notch running along Z, 5 mm deep, centred at X=48, so round parts from Ø10 to Ø30 seat in both notches as the fingers close. Each finger has two M4 counterbored mounting holes through its thickness along Y at X=8 and X=28, Z=0, counterbored from the outer face.

モデル情報

全体サイズ
60 × 44 × 20 mm
ボディ数
2
体積
25.7 cm³

ダウンロード

製作や使用の前に、お使いの CAD ツールまたはスライサーで形状と寸法を確認してください。

スタジオで開く

つくりたい部品はありますか?

サンプルを開くか、必要な部品を言葉で伝えてみてください。

無料クレジット・キャンペーン情報