Even parts whose profiles are defined by equations, such as a cycloidal reducer disc, can be created by entering the equations directly into CADlingo. The public 11-lobe cycloidal disc example is a model made as a single solid from a prompt containing the number of ring pins, pin circle radius, pin radius, eccentricity, and parametric curve equations.

Conditions in the prompt

The example defines a standard cycloidal disc profile with 12 ring pins (N=12), a pin circle radius of R=40, a pin radius of Rr=3, and an eccentricity of E=1.5. The number of lobes is N-1, or 11. The profile equations are as follows.

  • x(t) = R·cos t - Rr·cos(t + ψ) - E·cos(N·t)
  • y(t) = -R·sin t + Rr·sin(t + ψ) + E·sin(N·t)
  • ψ(t) = atan2(sin((1-N)·t), R/(E·N) - cos((1-N)·t)), t = 0~2π

The prompt includes reference values for checking the result as well as the equations. At t=0, the valley bottom is at a radius of 35.5 (in the +x direction), and the lobe tip is at a radius of 38.5, with the first lobe tip at 16.364° (360°/22) from +x. The disc is 12 mm thick, with a central Ø22 hole and six Ø12 output pin holes at 30° + k·60° on a Ø48 circle.

Values checked in the generated model

The public example measures 75.9 × 76.4 × 12 mm overall and has one body. In the generated mesh, the maximum radius from the disc axis is 38.5, matching the requested lobe tip radius, and there are 11 lobe tips around the outer edge. The valley bottom radius of 35.5 matches R - Rr - E, and the lobe tip radius of 38.5 matches R - Rr + E.

Including reference values like these lets you use numbers to check whether the generated geometry follows the equations.

Dimensions you can change in Studio

Open the example with Open in studio to change three dimensions directly.

  • Disc thickness: 6~18 mm
  • Center hole diameter: 11~33 mm
  • Output pin hole diameter: 6~18 mm

When you choose a value, the face moved by that dimension is highlighted, and you can preview the changed geometry before applying it. When designing a reducer, the output pin hole is typically sized to the output pin (or roller) diameter plus twice the eccentricity. With this example's eccentricity of 1.5, an Ø12 hole is the corresponding size for an Ø9 pin. Adjust this value to suit the pin you will use.

Moving on to the next step

You can download the disc as STEP and assemble it with ring pins, an eccentric shaft, and output pins in another CAD system to continue checking how they mesh. You can also export a disc cross-section as a dimensioned 2D DXF to discuss the profile with a laser or wire machining provider.

Use the same approach for your own parts. Enter the curve equations, parameter range, and coordinate reference, along with reference values at one or two points, such as the minimum and maximum radii and the angle of the first vertex. Before using the disc in an actual reducer, separately check the tooth profile modifications, tolerances, material, and heat treatment.