11로브 사이클로이드 디스크
CADlingo가 아래 프롬프트로 만든 모델입니다. 스튜디오에서 열면 3D로 살펴보고, 단면을 확인하고, 치수를 직접 조절해 볼 수 있습니다.
프롬프트
Model a cycloidal-reducer disc as ONE solid. Frame: disc axis parallel to Z through (X=5, Y=-8); disc coordinates (x, y) are measured from that point with x parallel to world X and y parallel to world Y. Thickness Z=0..12. Outline: the curve for t = 0..2·pi (the standard cycloidal-disc profile for N = 12 ring pins on a pin circle of radius R = 40, pin radius Rr = 3, eccentricity E = 1.5, giving N-1 = 11 lobes): x(t) = R·cos t - Rr·cos(t + psi) - E·cos(N·t) y(t) = -R·sin t + Rr·sin(t + psi) + E·sin(N·t) psi(t) = atan2( sin((1-N)·t), R/(E·N) - cos((1-N)·t) ). At t = 0 this gives the point (35.5, 0): a valley (minimum radius 35.5) on +x; the lobe tips (radius 38.5) are halfway between valleys, the first at 16.364° (360°/22) from +x. Holes through Z=0..12: a Ø22 centre bore on the disc axis, and six Ø12 output-pin holes on a Ø48 circle at 30° + k·60° (angles from +x toward +y).
모델 정보
- 전체 크기
- 75.9 × 76.4 × 12 mm
- 바디 수
- 1
- 부피
- 39.5 cm³
- 스튜디오에서 조절 가능
- 치수 3개
