3部品のシザーリンク
CADlingoが下のプロンプトから生成したモデルです。スタジオで開くと、3Dでの確認、断面表示、寸法の調整ができます。
プロンプト
Model a scissor link, assembled, as 3 separate solids: bar A, bar B and the pivot pin. Frame: the pivot axis is parallel to Z through X=15, Y=20. Angles in the XY plane from +X toward +Y. Distances along a bar are measured from the pivot axis along that bar's direction. Both bars have the same stadium outline in plan: 16 wide, straight sides, semicircular ends of radius 8 centred at -60 and +60 along the bar (overall length 136), with a Ø8.2 pivot hole on the pivot axis. Bar A: 5 thick, Z=0..5, its direction points at 35°. It has a Ø6.2 hole at -60 and, at the + end, a slot 6.2 wide along the bar with semicircular ends whose centres are at +48 and +60. Bar B: 5 thick, Z=5.2..10.2 (0.2 above bar A), its direction points at 145°, so the bars cross at 110°. It has Ø6.2 holes at -60 and +60. Pivot pin: Ø8 shank on the pivot axis from Z=-4 to Z=10.2, head Ø14 from Z=10.2 to Z=12.2 seated on bar B's top face, and a Ø2.5 split-pin hole through the shank along the X direction at Z=-1.5.
モデル情報
- 全体サイズ
- 114.3 × 84.8 × 16.2 mm
- ボディ数
- 3
- 体積
- 20.7 cm³
- スタジオで調整可能
- 3個の寸法
